Your ISO/QS Thermoset Plastic Injection Source for Automotive, Medical, Industrial and Consumer Products!

 

Click Here for D. Moore & Associates HOME PAGE! Home Page

 

Click Here for Information on Stampings & Assemblies! Stampings

 

Click Here for Information on Stampings & Assemblies! Plastic -Extrusions

 

Click Here for Information on Plastic Components or Tooling! Plastics

 

Click Here for Information on Plastic Components or Tooling! Prototypes

 

Click Here for Information on Plastic Coatings & Dipping! Coatings

 

Send Your RFQ TODAY! Quote

 

Send Your RFQ TODAY!  Shop Talk

 

Click Here to put D. Moore & Associates to work for you TODAY! Sales





                                                                                                                                                        

...Your ISO Certified Blow Mold Plastic Source.

 

We are your full-service blow mold plastics part and tool supplier producing the highest quality tools and parts for the Automotive, Appliance, Medical, Consumer and Industrial OEM markets.  Bring us your component idea and we'll take it from conception to working design utilizing our 3-D CAD/CAM  modeling system.  When we design and engineer tools we factor quality, efficiency and durability into every part.  We review every detail and eliminate potential problems such as nit lines, lipping and sink holes before the tool is built.  Our years of experience allow us to enhance your tool and part  performance.                                                                     

Our complete blow molding operation affords you the ability to fully realize the benefits inherent on the quality of our design and tooling.  We offer a complete "turnkey" operation with aggressive prototype and tooling deadlines.  We assure start to finish quality, consistency and total quality accountability.

                   Complicated vent and duct work for under IP and under seat applications!                    We provide HVAC ventillation products for automotive and truck applications.

Our State of the Art Plastics Supplier Provides:We make Automotive OEM Exterior Accessories!  Call TODAY!

  • World class quality assurance with IS0 Certification.
  • In-house validation processes ensure tools and part meet or exceed your quality standards and expectations.
  • Molding presses with "closed loop" control offering optimum process capability.
  • Robotic part removal which improves efficiencies and cycle consistency, while providing part and tooling protection.
  • Computerized network allows the shop floor to access engineering data where the machining operations take place

                We supply custom packaging requirements from bulk to individual retail packaging.             We meet your strict inspection requirements!  ISO-QS          We mold large recreational products!We can supply 40/60 Blow Molded Seat Components and Bolsters...call TODAY! 

Material Capabilities:                                                                                                    

Extensive experience with resins including Polycarbonate, ABS, Noryl/PPE.

 

Press Equipment: 

Blow Mold Press Size Press
Manufacturer
Platen Size Head
Center
Tons of
Clamp
Minimum
Shut
Max
Daylight
Programmer
Dual 8 LB. Head Sterling 54" X 56" 26" 100 12" 56" Maco 8000, 100 point
Dual 8 LB. Head Sterling 54" X 56" 26" 100 12" 56" Maco 8000, 100 point
Dual 8 LB. Head Sterling 54" X 56" 26" 100 12" 56" Maco 8000, 100 point
Dual 10 LB. Head Sterling 54" X 56" 26" 100 12" 56" Maco 8000, 100 point
Dual 10 LB. Head Graham 74" X 60" 36" 190 16" 72" Maco 6500, 100 point
Dual 15 LB. Head Sterling 74" X 60" 36" 188 12" 72" Maco 8000, 100 point
Dual 20 LB. Head Graham 74" X 60" 36" 190 16" 72" Maco 6500, 100 point
Dual 30 LB. Head Sterling 84" X 74" 42" 200 16" 66" Maco 6500, 100 point
Dual 42 LB. Head Sterling 84" X 60" 42" 200 16" 72" Maco 8000, 100 point
  • Bulk material handling systems with silo storage

Tooling:

When we design and engineer tools we maximize die performance for part accuracy, cycle times and tool life often exceeding customer expectations.   Using computerized mold fill simulation software, we can anticipate and determine proper gate locations before the mold is designed.  This analysis allows us the determine potential part warpage, weld lines, and air traps.  This technology enables us to shorten  the debugging phase of mold validation which translates into a "fast to market" production approach.  

We are your one stop source for:

  • Tool Design
  • Prototype Tooling
  • Production Tooling
  • Part Production

Tooling Equipment:

  • High Speed 3-D contour machining.
  • High Speed 3-D graphite milling.
  • 4 Axis RAM EDM with 3-D Orbiting.
  • 4 Axis Wire EDM
  • Complete grinding for OD and ID requirements.
  • In-house tool trial.

We Provide Products to the Following Markets:

  • Exterior Automotive
  • Interior Automotive
  • Sporting Goods
  • Furniture
  • Child Restraint
  • Outdoor Rec. Equipment
  • Office Products
  • Lawn & Garden
  • Heavy Truck
  • Medical
  • Kitchen Products

We make storage products!We make building and farm equipment!We make Large Waste Containers! We Blow Mold Gas Tanks!   

                     

 

                                                                   Your ISO Extrusion Source for Automotive, Medical, Industrial and Consumer Products!

                                                   

| Stampings | Plastics | Machining | Coatings | Die Cast Rapid Prototypes  | Internet Marketing| Representation | Quote  | Instrument Clusters   |

D. Moore & Associates, Ltd. 2016 All Rights Reserved